Portable solar panels and solar generators are great to keep you powered up when enjoying outdoor activities, camping, or using your RV in a spot with no power (sometimes those are the best spots!). With the new advances from BLUETTI, solar panels can even provide power at home during power outages at home — no smelly gas generators required! The BLUETTI solar panel product line has a shorter history than its power stations. The first one, SP120, was released in July 2020 along with the superstar AC200 power station. Later in January 2021, they announced the bigger 200-watt SP200 with their first household power center, the EP500/Pro. Both were instant hits with the global community. It’s exciting to see upgrades hitting the market so quickly with these new and improved Solar panel options.
What’s New and Improved in the New Solar Panels?
Let’s take a closer look at the PV120 and PV200 and see what’s changed as compared to the previous SP solar panels.
Benefits of Connecting Battery Cells in Parallel vs. Series
A big improvement in the new SP120 and SP200 solar cells is that the battery cells are now connected in parallel rather than in series, which increases their capacity. A parallel connection between battery cells is a connection where all of the positive terminals of the cells are connected, and all of the negative terminals are connected together. The larger cell is called a parallel-group or module, or just a group or module. The total capacity of the combined cells is equal to the number of cells connected in parallel multiplied by the capacity of each cell. For example, if you connect two 3.5 Ah cells in parallel, you would have a single 7 Ah cell. Another benefit of connecting battery cells in parallel is the group of connected cells can support more current than the single cells being connected. For example, if each of the two battery cells mentioned above can support 5 amps or 5 A, each cell can power a 5 A load. Anything larger could cause it to overheat. However, connecting these two battery cells in parallel doubles the current carrying capacity of the cells. This two-cell module can power a 10 A load, and a three-cell module can power a 15 A load, and so on.
Updated Design of the PV120 and PV200 Solar Panels
The PV series solar panels have an integrated blue acrylonitrile butadiene styrene (ABS) handle. The SP series have black rubber handles.
The PV series features a one-piece, waterproof coating design that encapsulates all the solar cells, while the panels on the SP series are stitched together on one giant raw canvas.
The kickstand of the PV series features a new snap fastener design, which allows you more options when adjusting the angle of the solar panel.
Both the PV and SP series is close to the exact dimensions. However, the PV solar panels are slightly heavier (by about two pounds) due to the new waterproof coating.
Solar Panel Efficiency
Both BLUETTI’s PV and SP solar panels are made of monocrystalline, which puts the efficiency of the solar panels around 23% to 24%. Monocrystalline is constructed from a single large silicon crystal. Solar panels made from monocrystalline are arguably the most effective because they’re able to produce high amounts of power even in low to moderate levels of sunlight. While they’re the most expensive of the three types (Monocrystalline, Polycrystalline, Amorphous), they’re usually the most durable and least sensitive to high temperatures.
Improved Performance in Shade
When solar panels are exposed to shady conditions, their efficiency drops, and their performance suffers as a result. Environmental obstructions such as trees or nearby buildings, clouds, self-shading between panels in parallel rows, dirt, dust, and various other trash such as bird droppings cause shading. But now, you can get rid of all these troubles with BLUETTI’s PV200 or PV120.
Partial shading of a system matters as all panels in a section need to run at the same voltage; if one panel is shaded even partially, this will decrease the whole system’s production. With BLUETTI’s SP200 solar panels, 10% of area shading may cause a shockingly 40% or more power loss to the entire solar array. The same thing can happen with panels from other brands. The upgraded PV series connected in parallel decreases the loss of power from the shade. Each circuit on the panel can run individually and at the same voltage, meaning you will only lose the power for the individual panel in the shade, lowering the overall impact on the entire system.
Where to Buy BLUETTI’s New PV120 and PV300 Solar Panels
BLUETTI’s new PV solar panels are now on sale with their solar generator bundles. The 200W PV200 is usually listed for $549 per piece, and the 120W version for $399. But now, with an AC200P power station and three PV200 solar panels bundle (AC200P+PV200×3), you can get the 200W panels for as low as $425 each. But, the sale ends at 7 pm PDT on September 30th. Keep that in mind if you’re in the market for new solar gear. Comment Name * Email *
Δ Save my name and email and send me emails as new comments are made to this post.
